VW MKI MKII GTI 1.8/2.0L 8v 118mm head stud +MLS decompression Head Gasket
SKU: EXPRIS07-EVJTCB02-EVJTCB-1 EXPRIS07-EVJTCB04-EVJTCB-2 EXPRIS07-EVJTCB05-EVJTCB-3 EXPRIS07-EVJTCB03EVJTCB-4
- VW cylinder head stud set, available in either 118mm (this item) or 136mm length for taller blocks.
- They will fit earlier and old style VW 8V cylinder heads.
- The set contains 10 Studs, 10 washers and 12 point nuts, (you will need a 1/2 or 13mm 12 point socket).
- The studs are for M11 threads, please confirm with your OEM bolts before purchase.
- These will replace 93mm OEM bolts.
- Maximum Torque - 72 ft/lb
- Special cylinder head gasket for turbo conversion
- With this special Turbo multilayer metal cylinder head gasket
- The compression reduction is already integrated in the seal.
- (Ground and coated)
- Will accept pistons up to 84.00mm overbored sized, can be used with smaller bores with no problem too.
- Compression ratio NEW will depend on the engine used
- Manufacturer: SPA TURBO
- Engine Code: All 2 liters Blocks of VW 8V and 16V (some small modifications may be necessary in some cases)
- 9A, 6A, ACE, 2E, ADY, ACX ABF, AGG, AKR, ABA, ABBOT, ADW, AAD, AAE, CAST OFF, 3A, SD.
- Similar to OE numbers/Comparable numbers of manufacturers
ELWIS ROYAL: 0056010
PAYEN : BT810
MEGA CAR: 101030383048B
FEBI BILSTEIN: 15558
SWAG: 32 91 5558
- Available in 1.5mm; 2.0mm, 2.5mm and 3.4mm thickness
- We're the VW Turbo experts!
Other fine products
- Unknown Type
- Adapters for fuel injectors
- Adapters, lubrification & more
- Air filters
- Connecting Rods
- Cylinder head
- Electric components
- Electric fuel pump
- Engine mounts
- Engine Pulleys
- Forged Piston and Connecting Rods Kit
- Forged pistons
- Fuel Pressure Regulators / Fuel management units
- Ignition coil
- Intake manifolds
- Intake tubes / Acessories
- Oil Coolers
- Other Shop Equipment
- Perfomance Camshafts
- Performance head gaskets /Head stud sets
- Spark plug wire sets
- Turbine housings
- Turbo manifolds