VW 8v/16v ABA ABF MLS High Compression Head Gasket - 0.5mm + VW 8V 276 N/A application hydraulic tappets performance camshaft VW 8v/16v ABA ABF MLS High Compression Head Gasket - 0.5mm + VW 8V 276 N/A application hydraulic tappets performance camshaft SPA PERFORMANCE VW 8v/16v ABA ABF MLS High Compression Head Gasket - 0.5mm Special cylinder head gasket for turbo conversion With this special Turbo multilayer metal cylinder head gasket The compression raise is already integrated in the seal. (Ground and coated) Will accept pistons up to 84.00mm overbored sized, can be used with smaller bores with no problem too. Compression ratio NEW will depend on the engine used Manufacturer: SPA TURBO Engine Code: All 2 liters   Blocks of VW 8V and 16V (some small modifications may be necessary in some cases) 9A, 6A, ACE, 2E, ADY, ACX ABF, AGG, AKR, ABA, ABBOT, ADW, AAD, AAE, CAST OFF, 3A, SD. Similar to OE numbers/Comparable numbers of manufacturers VW: 048103383B VW: 053103383 VW: 053103383A VW: 053103383B VW: 53103383             ELWIS ROYAL: 0056010 PAYEN : BT810 MEGA CAR: 101030383048B CORTECO: 414604P ELRING: 915.590 ELRING: 915.599 FEBI BILSTEIN: 15558 GLAZIER: 50151 GOETZE: 30-027257-20 REINZ: 61-28290-00 SPESSO: 21194/7620 SWAG: 32 91 5558 REINZ: 61-29305-00 Available in 0.9mm; 1.5mm; 2.0mm, 2.5mm and 3.4mm thickness We're the  VW Turbo experts!   VW 8V 276 N/A application hydraulic tappets performance camshaft Application: EA 827 engines Capacities 1781-1847-1984cc from 1986 8V Engines with hydraulic tappets VW Golf, Corrado, Audi 80, 100, 5000, Quattro, Jetta, Passat, Scirocco, Sharon, Vento, Gol, Pointer, Saveiro. Duration intake: 276 degreesDuration exhaust: 276 degreesIntake valve lift: 11.50mmExhaust valve lift: 11.50mmlobe centers: 110 degreesvalve timingIntake open: 27 degreesIntake closes: 69 degreesExhaust open: 67 degreesExhaust close: 29 degreesValve clearance: hydraulic lifters*Base circle: 34mmMade of 1045 quenched steelBillet machined52-58 HRC IMPORTANT: this is a performance camshaft, not a OEM replacement, installation may require ECU work, cylinder head work, special lifters and springs, no instructions included, no other parts included.   Attention: this camshaft can be used with solid lifters as long as valve lash caps (EMPI 4006, or similar) are assembled and adjusted individually. We strongly recommend that this should be done by a proper professional in order to achieve the correct valve lash values.

VW 8v/16v ABA ABF MLS High Compression Head Gasket - 0.5mm + VW 8V 276 N/A application hydraulic tappets performance camshaft

Code: CMBEVJ06W07019
Sale
$224.90 $199.90
In Stock
Add to Wishlist Add to Compare
VW 8v/16v ABA ABF MLS High Compression Head Gasket - 0.5mm
  • Special cylinder head gasket for turbo conversion
  • With this special Turbo multilayer metal cylinder head gasket
  • The compression raise is already integrated in the seal.
  • (Ground and coated)
  • Will accept pistons up to 84.00mm overbored sized, can be used with smaller bores with no problem too.
  • Compression ratio NEW will depend on the engine used
  • Manufacturer: SPA TURBO
  • Engine Code: All 2 liters   Blocks of VW 8V and 16V (some small modifications may be necessary in some cases)
  • 9A, 6A, ACE, 2E, ADY, ACX ABF, AGG, AKR, ABA, ABBOT, ADW, AAD, AAE, CAST OFF, 3A, SD.
  • Similar to OE numbers/Comparable numbers of manufacturers
VW: 048103383B
VW: 053103383
VW: 053103383A
VW: 053103383B
VW: 53103383            
ELWIS ROYAL: 0056010
PAYEN : BT810
MEGA CAR: 101030383048B
CORTECO: 414604P
ELRING: 915.590
ELRING: 915.599
FEBI BILSTEIN: 15558
GLAZIER: 50151
GOETZE: 30-027257-20
REINZ: 61-28290-00
SPESSO: 21194/7620
SWAG: 32 91 5558
REINZ: 61-29305-00
  • Available in 0.9mm; 1.5mm; 2.0mm, 2.5mm and 3.4mm thickness
  • We're the  VW Turbo experts!

 

VW 8V 276 N/A application hydraulic tappets performance camshaft

  • Application: EA 827 engines Capacities 1781-1847-1984cc from 1986
  • 8V Engines with hydraulic tappets
  • VW Golf, Corrado, Audi 80, 100, 5000, Quattro, Jetta, Passat, Scirocco, Sharon, Vento, Gol, Pointer, Saveiro.

Duration intake: 276 degrees
Duration exhaust: 276 degrees
Intake valve lift: 11.50mm
Exhaust valve lift: 11.50mm
lobe centers: 110 degrees
valve timing
Intake open: 27 degrees
Intake closes: 69 degrees
Exhaust open: 67 degrees
Exhaust close: 29 degrees
Valve clearance: hydraulic lifters*
Base circle: 34mm
Made of 1045 quenched steel
Billet machined
52-58 HRC

IMPORTANT: this is a performance camshaft, not a OEM replacement, installation may require ECU work, cylinder head work, special lifters and springs, no instructions included, no other parts included.

     

    Attention: this camshaft can be used with solid lifters as long as valve lash caps (EMPI 4006, or similar) are assembled and adjusted individually. We strongly recommend that this should be done by a proper professional in order to achieve the correct valve lash values.

    VW 8v/16v ABA ABF MLS High Compression Head Gasket - 0.5mm
    • Special cylinder head gasket for turbo conversion
    • With this special Turbo multilayer metal cylinder head gasket
    • The compression raise is already integrated in the seal.
    • (Ground and coated)
    • Will accept pistons up to 84.00mm overbored sized, can be used with smaller bores with no problem too.
    • Compression ratio NEW will depend on the engine used
    • Manufacturer: SPA TURBO
    • Engine Code: All 2 liters   Blocks of VW 8V and 16V (some small modifications may be necessary in some cases)
    • 9A, 6A, ACE, 2E, ADY, ACX ABF, AGG, AKR, ABA, ABBOT, ADW, AAD, AAE, CAST OFF, 3A, SD.
    • Similar to OE numbers/Comparable numbers of manufacturers
    VW: 048103383B VW: 053103383 VW: 053103383A VW: 053103383B VW: 53103383             ELWIS ROYAL: 0056010 PAYEN : BT810 MEGA CAR: 101030383048B CORTECO: 414604P ELRING: 915.590 ELRING: 915.599 FEBI BILSTEIN: 15558 GLAZIER: 50151 GOETZE: 30-027257-20 REINZ: 61-28290-00 SPESSO: 21194/7620 SWAG: 32 91 5558 REINZ: 61-29305-00
    • Available in 0.9mm; 1.5mm; 2.0mm, 2.5mm and 3.4mm thickness
    • We're the  VW Turbo experts!

     

    VW 8V 276 N/A application hydraulic tappets performance camshaft

    • Application: EA 827 engines Capacities 1781-1847-1984cc from 1986
    • 8V Engines with hydraulic tappets
    • VW Golf, Corrado, Audi 80, 100, 5000, Quattro, Jetta, Passat, Scirocco, Sharon, Vento, Gol, Pointer, Saveiro.

    Duration intake: 276 degrees
    Duration exhaust: 276 degrees
    Intake valve lift: 11.50mm
    Exhaust valve lift: 11.50mm
    lobe centers: 110 degrees
    valve timing
    Intake open: 27 degrees
    Intake closes: 69 degrees
    Exhaust open: 67 degrees
    Exhaust close: 29 degrees
    Valve clearance: hydraulic lifters*
    Base circle: 34mm
    Made of 1045 quenched steel
    Billet machined
    52-58 HRC

    IMPORTANT: this is a performance camshaft, not a OEM replacement, installation may require ECU work, cylinder head work, special lifters and springs, no instructions included, no other parts included.

       

      Attention: this camshaft can be used with solid lifters as long as valve lash caps (EMPI 4006, or similar) are assembled and adjusted individually. We strongly recommend that this should be done by a proper professional in order to achieve the correct valve lash values.

      Use and Retention

      We use the personal information we collect to: provide and improve our Services, provide you with a personalized experience on our sites (especially, by offering you services and items that you may like), contact you about your account and our Services, provide you customer service, provide you with personalized advertising and marketing, and detect, prevent, mitigate, and investigate fraudulent or illegal activities.

      We retain your personal information as long as it is necessary and relevant for our operations. In addition, we may retain personal information from closed accounts to comply with national laws, prevent fraud, collect any fees owed, resolve disputes, troubleshoot problems, assist with any investigation, enforce our User Agreement and take other actions permitted or required by applicable national laws.

       

      Warranty Policies

      SPA Turbo offers a one year, unlimited mileage warranty on all parts sold unless otherwise noted. We only offer the highest quality parts available, but in some rare cases there are manufacturer defects. If you have a defective item under warranty we offer options to make warranty service easier for you and we will send you a new replacement part. However, our warranty does not cover any labor that may be involved with your repair. In most cases you have the following options for warranty service:

      1) You may return the warranty item to us for a replacement.
      2) You may pay a deposit and have a replacement item sent in advance. Once you return the warranty item to us your deposit will be refunded. In either case we pay for shipping within the continental USA.
      Please be sure to include some contact number(s) and email(s). Our techs will contact you with troubleshooting tips or to arrange a replacement.

       

      Warranty Claim

      If you have a problem with one of our parts, we will need to process a warranty claim. If the part has not been installed, then please contact us and we can order up the correct parts.

      The following information must be mailed to sales@spaturbousa.com before any replacement can be shipped.

      1. A cover letter with your name, invoice number and problem. Ship to name if it was shipped somewhere else.
      2. pictures and description of the problem, and the engine that the part was installed to.

       

      Legal Warranty Version

      We warranty all automotive parts to be free from defects in material and workmanship for the period specified on your invoice. It begins from the date purchased. This warranty does not apply to parts unless the installation instructions are followed in their entirety. If instructions are not available the work should be performed by a licensed mechanic.

      This warranty does not cover any expenses incurred in the removal and / or reinstallation of the auto part. Specifically, this warranty does not cover any expenses for TIME, RENTAL, OR OTHER PARTS not purchased from us, or ANY LABOR. This warranty covers fixing or replacing the part only. This warranty is offered only to the original purchaser of the part. This warranty does not apply, and will be voided, if the auto part sold has been damaged by abuse, misuse, accident, neglect, or alteration, or if it has been repaired by anyone other than us. Your warranty will be null and void if the part fails due to improper installation. If the auto part sold should prove defective in material or workmanship within the warranty period, return the auto part to us, postage prepaid, along with your sales invoice. Your dated invoice will establish your eligibility for the warranty. We will, at our option, replace or repair the part free of charge and return it to you postage prepaid.

      THE EXPRESS WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND OUR ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.

       

      Exchange Policy

      If you need to trade your item, you can exchange qualifying items through sales@spaturbousa.com.

      If the item you wish to return doesn't have an exchange option or you received the item as a gift, you'll need to return the original item and place a new order.

      Note:

      If the item you're exchanging costs less that your original purchase we will refund you the difference.

      This policy refers to color/size or if it doesn’t fit your car only.

       

      Return Policy

      Items can be returned and replaced within 30 days of ordered.

      You need to inform us the tracking number so can advise our fulfillment center, once the item is received, it takes 2 business days for the refund to be processed and 3-5 business days for the refund amount to show up in your account.

      Your return label will require you to return the item at your own expense.

      If you're returning a defective, damaged or incorrect item, please contact us before you ship the Item.