Forged piston set 81mm 1.8L 20V VW/AUDI Forged piston set 81mm 1.8L 20V VW/AUDI SPA PERFORMANCE For VW/AUDI 1.8 20V engines Nominal bore diameter: 81mm (increase engine displacement to 1780cc) Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder) Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm Compression height: 32.70mm. Dish volume: 7cc Compression ratio: 8.5:1 Pin offset: 1.10mm. Material: Forged aluminum 4032 T6. Average piston weight (unit, without pin): 318,66g (11.2 oz). Rated for 1000hp. Innovative high performance piston skirt design that provides: 1. Smaller piston to bore clearance  2. Less noise 3. Better ring seal 4. Higher power 5. Durability Features: Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions. Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal. Pin oil lubrication by broaches and oiler to reduce friction and increase durability. Super A Piston Pin (63.45mm) – 4pcs set For VW 827 engines (Super A pistons) Dimensions: 63.45mm x 20mm (length x O.D.) Average unit weight: 116g (4.09 oz) Rated for 1.000hp Made from special steel alloys that combines optimal mass with high resistance.   Piston Rings 81mm SPA DLC series Specifications:1º ring 1.5mm – Made from carbon steel, which is 35% stronger than cast iron and about 30% lighter. DLC treated, which is the application of carbon particles, that provides higher resistance and lower friction. 2° ring 1.5mm – Made from cast iron. 3º ring 2.0mm – Made by 3 parts, providing easy handling, better oil film stability and improvement in oil removal by the lubrication holes due to its optimized design.

Forged piston set 81mm 1.8L 20V VW/AUDI

Code: CMBMVL016JG035

For VW/AUDI 1.8 20V engines

Nominal bore diameter: 81mm (increase engine displacement to 1780cc)

Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder)

Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm

Compression height: 32.70mm.

Dish volume: 7cc

Compression ratio: 8.5:1

Pin offset: 1.10mm.

Material: Forged aluminum 4032 T6.

Average piston weight (unit, without pin): 318,66g (11.2 oz).

Rated for 1000hp.

Innovative high performance piston skirt design that provides:

1. Smaller piston to bore clearance 

2. Less noise

3. Better ring seal

4. Higher power

5. Durability


Features:

Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions.

Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal.

Pin oil lubrication by broaches and oiler to reduce friction and increase durability.


Super A Piston Pin (63.45mm) – 4pcs set

For VW 827 engines (Super A pistons)

Dimensions: 63.45mm x 20mm (length x O.D.)

Average unit weight: 116g (4.09 oz)

Rated for 1.000hp

Made from special steel alloys that combines optimal mass with high resistance.

 

Piston Rings 81mm SPA DLC series

Specifications:

1º ring 1.5mm – Made from carbon steel, which is 35% stronger than cast iron and about 30% lighter. DLC treated, which is the application of carbon particles, that provides higher resistance and lower friction.

2° ring 1.5mm – Made from cast iron.

3º ring 2.0mm – Made by 3 parts, providing easy handling, better oil film stability and improvement in oil removal by the lubrication holes due to its optimized design.

        For VW/AUDI 1.8 20V engines

        Nominal bore diameter: 81mm (increase engine displacement to 1780cc)

        Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder)

        Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm

        Compression height: 32.70mm.

        Dish volume: 7cc

        Compression ratio: 8.5:1

        Pin offset: 1.10mm.

        Material: Forged aluminum 4032 T6.

        Average piston weight (unit, without pin): 318,66g (11.2 oz).

        Rated for 1000hp.

        Innovative high performance piston skirt design that provides:

        1. Smaller piston to bore clearance 

        2. Less noise

        3. Better ring seal

        4. Higher power

        5. Durability


        Features:

        Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions.

        Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal.

        Pin oil lubrication by broaches and oiler to reduce friction and increase durability.


        Super A Piston Pin (63.45mm) – 4pcs set

        For VW 827 engines (Super A pistons)

        Dimensions: 63.45mm x 20mm (length x O.D.)

        Average unit weight: 116g (4.09 oz)

        Rated for 1.000hp

        Made from special steel alloys that combines optimal mass with high resistance.

         

        Piston Rings 81mm SPA DLC series

        Specifications:

        1º ring 1.5mm – Made from carbon steel, which is 35% stronger than cast iron and about 30% lighter. DLC treated, which is the application of carbon particles, that provides higher resistance and lower friction.

        2° ring 1.5mm – Made from cast iron.

        3º ring 2.0mm – Made by 3 parts, providing easy handling, better oil film stability and improvement in oil removal by the lubrication holes due to its optimized design.

              Use and Retention

              We use the personal information we collect to: provide and improve our Services, provide you with a personalized experience on our sites (especially, by offering you services and items that you may like), contact you about your account and our Services, provide you customer service, provide you with personalized advertising and marketing, and detect, prevent, mitigate, and investigate fraudulent or illegal activities.

              We retain your personal information as long as it is necessary and relevant for our operations. In addition, we may retain personal information from closed accounts to comply with national laws, prevent fraud, collect any fees owed, resolve disputes, troubleshoot problems, assist with any investigation, enforce our User Agreement and take other actions permitted or required by applicable national laws.

               

              Warranty Policies

              SPA Turbo offers a one year, unlimited mileage warranty on all parts sold unless otherwise noted. We only offer the highest quality parts available, but in some rare cases there are manufacturer defects. If you have a defective item under warranty we offer options to make warranty service easier for you and we will send you a new replacement part. However, our warranty does not cover any labor that may be involved with your repair. In most cases you have the following options for warranty service:

              1) You may return the warranty item to us for a replacement.
              2) You may pay a deposit and have a replacement item sent in advance. Once you return the warranty item to us your deposit will be refunded. In either case we pay for shipping within the continental USA.
              Please be sure to include some contact number(s) and email(s). Our techs will contact you with troubleshooting tips or to arrange a replacement.

               

              Warranty Claim

              If you have a problem with one of our parts, we will need to process a warranty claim. If the part has not been installed, then please contact us and we can order up the correct parts.

              The following information must be mailed to sales@spaturbousa.com before any replacement can be shipped.

              1. A cover letter with your name, invoice number and problem. Ship to name if it was shipped somewhere else.
              2. pictures and description of the problem, and the engine that the part was installed to.

               

              Legal Warranty Version

              We warranty all automotive parts to be free from defects in material and workmanship for the period specified on your invoice. It begins from the date purchased. This warranty does not apply to parts unless the installation instructions are followed in their entirety. If instructions are not available the work should be performed by a licensed mechanic.

              This warranty does not cover any expenses incurred in the removal and / or reinstallation of the auto part. Specifically, this warranty does not cover any expenses for TIME, RENTAL, OR OTHER PARTS not purchased from us, or ANY LABOR. This warranty covers fixing or replacing the part only. This warranty is offered only to the original purchaser of the part. This warranty does not apply, and will be voided, if the auto part sold has been damaged by abuse, misuse, accident, neglect, or alteration, or if it has been repaired by anyone other than us. Your warranty will be null and void if the part fails due to improper installation. If the auto part sold should prove defective in material or workmanship within the warranty period, return the auto part to us, postage prepaid, along with your sales invoice. Your dated invoice will establish your eligibility for the warranty. We will, at our option, replace or repair the part free of charge and return it to you postage prepaid.

              THE EXPRESS WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND OUR ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.

               

              Exchange Policy

              If you need to trade your item, you can exchange qualifying items through sales@spaturbousa.com.

              If the item you wish to return doesn't have an exchange option or you received the item as a gift, you'll need to return the original item and place a new order.

              Note:

              If the item you're exchanging costs less that your original purchase we will refund you the difference.

              This policy refers to color/size or if it doesn’t fit your car only.

               

              Return Policy

              Items can be returned and replaced within 30 days of ordered.

              You need to inform us the tracking number so can advise our fulfillment center, once the item is received, it takes 2 business days for the refund to be processed and 3-5 business days for the refund amount to show up in your account.

              Your return label will require you to return the item at your own expense.

              If you're returning a defective, damaged or incorrect item, please contact us before you ship the Item.