M7 Speed R56 Mini Cooper Oil Catch Can Kit | Black Hoses | N14B Engine
The NEW & IMPROVED Oil Catch Can kit for MINIs equipped with the N14B engine comes with our NEW 1/2" diameter one piece molded hoses available in BLACK or RED. The kit features a "designed-to-fit" stainless steel bracket, mounting hardware and the NEW custom molded large 1/2" diameter hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit will fit on the firewall directly behind the outlet of the stock or aftermarket airbox. It uses the factory tab located on the firewall. Fitment is guaranteed.
Oil separation is accomplished inside the can using coalescing separation technology. This system combines the small mist droplets coming from the engine crankcase into larger and heavier drops. Gravity then pulls the heavy drops out of the flow stream and into the reservoir for collection. The cleaned airflow is then directed out of the OCC system and into the intake hose for recirculation. Test results show up to 95% of the oil is removed from the PCV system with the M7 system in place. Baffles are not required because the airflow within the PCV system is very low. (less than 1 CFM) At these extremely low flow rates baffles would not separate mist. Baffles are met to redirect flow within a closed chamber. (as in in a muffler)
"Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves.
Because the 2007 & up MINI is a direct injection engine, the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns and sticks to the intake valves and builds up into a flow choking hydrocarbon mess. The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.
By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!. The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.
Now with our exclusive "Exact-Fit" 1/2" diameter molded rubber hose kit and brackets makes installation super-easy for the DIYer.
Features:
- 100% Precision CNC machined from aircraft grade billet aluminum.
- Robust design. All leak paths are o-ring sealed.
- ZERO leakage GUARANTEED! No Check Engine Lights (CEL or DTC codes)
- Overall Dimensions
- 2.7" [69mm] diameter]
- 4.1" [105mm tall]
- Holds 4.5 fl. oz. [132 ml]
- Features a threaded and sealed dipstick to easily check reservoir level.
- Bright black anodized for corrosion protection.
- NEW 1/2" diameter one piece molded hoses available in BLACK or RED.
- Stainless steel bracket and mounting hardware.
Benefits:
- Eliminate intake tract oil contamination, carbon build-up and intake valve damage.
- Prevent premature sensor failure and distructive detionation.
- Keep engine performance at peak levels.
- Removes up to 95% of the oil contained in the PCV airflow.
The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.
All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are included, including an oil drain plug and an easy to view sight tube. The sight tube lets you know the amount of oil in the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that do not perform. By the best....Buy M7 Speed products! We are MINI Performance experts:
Engineered.....Tested.....& Proven to PERFORM!
The NEW & IMPROVED Oil Catch Can kit for MINIs equipped with the N14B engine comes with our NEW 1/2" diameter one piece molded hoses available in BLACK or RED. The kit features a "designed-to-fit" stainless steel bracket, mounting hardware and the NEW custom molded large 1/2" diameter hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit will fit on the firewall directly behind the outlet of the stock or aftermarket airbox. It uses the factory tab located on the firewall. Fitment is guaranteed.
Oil separation is accomplished inside the can using coalescing separation technology. This system combines the small mist droplets coming from the engine crankcase into larger and heavier drops. Gravity then pulls the heavy drops out of the flow stream and into the reservoir for collection. The cleaned airflow is then directed out of the OCC system and into the intake hose for recirculation. Test results show up to 95% of the oil is removed from the PCV system with the M7 system in place. Baffles are not required because the airflow within the PCV system is very low. (less than 1 CFM) At these extremely low flow rates baffles would not separate mist. Baffles are met to redirect flow within a closed chamber. (as in in a muffler)
"Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves.
Because the 2007 & up MINI is a direct injection engine, the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns and sticks to the intake valves and builds up into a flow choking hydrocarbon mess. The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.
By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!. The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.
Now with our exclusive "Exact-Fit" 1/2" diameter molded rubber hose kit and brackets makes installation super-easy for the DIYer.
Features:
- 100% Precision CNC machined from aircraft grade billet aluminum.
- Robust design. All leak paths are o-ring sealed.
- ZERO leakage GUARANTEED! No Check Engine Lights (CEL or DTC codes)
- Overall Dimensions
- 2.7" [69mm] diameter]
- 4.1" [105mm tall]
- Holds 4.5 fl. oz. [132 ml]
- Features a threaded and sealed dipstick to easily check reservoir level.
- Bright black anodized for corrosion protection.
- NEW 1/2" diameter one piece molded hoses available in BLACK or RED.
- Stainless steel bracket and mounting hardware.
Benefits:
- Eliminate intake tract oil contamination, carbon build-up and intake valve damage.
- Prevent premature sensor failure and distructive detionation.
- Keep engine performance at peak levels.
- Removes up to 95% of the oil contained in the PCV airflow.
The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.
All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are included, including an oil drain plug and an easy to view sight tube. The sight tube lets you know the amount of oil in the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that do not perform. By the best....Buy M7 Speed products! We are MINI Performance experts:
Engineered.....Tested.....& Proven to PERFORM!
Use and Retention
We use the personal information we collect to: provide and improve our Services, provide you with a personalized experience on our sites (especially, by offering you services and items that you may like), contact you about your account and our Services, provide you customer service, provide you with personalized advertising and marketing, and detect, prevent, mitigate, and investigate fraudulent or illegal activities.
We retain your personal information as long as it is necessary and relevant for our operations. In addition, we may retain personal information from closed accounts to comply with national laws, prevent fraud, collect any fees owed, resolve disputes, troubleshoot problems, assist with any investigation, enforce our User Agreement and take other actions permitted or required by applicable national laws.
Warranty Policies
SPA Turbo offers a one year, unlimited mileage warranty on all parts sold unless otherwise noted. We only offer the highest quality parts available, but in some rare cases there are manufacturer defects. If you have a defective item under warranty we offer options to make warranty service easier for you and we will send you a new replacement part. However, our warranty does not cover any labor that may be involved with your repair. In most cases you have the following options for warranty service:
1) You may return the warranty item to us for a replacement.
2) You may pay a deposit and have a replacement item sent in advance. Once you return the warranty item to us your deposit will be refunded. In either case we pay for shipping within the continental USA.
Please be sure to include some contact number(s) and email(s). Our techs will contact you with troubleshooting tips or to arrange a replacement.
Warranty Claim
If you have a problem with one of our parts, we will need to process a warranty claim. If the part has not been installed, then please contact us and we can order up the correct parts.
The following information must be mailed to sales@spaturbousa.com before any replacement can be shipped.
- A cover letter with your name, invoice number and problem. Ship to name if it was shipped somewhere else.
- pictures and description of the problem, and the engine that the part was installed to.
Legal Warranty Version
We warranty all automotive parts to be free from defects in material and workmanship for the period specified on your invoice. It begins from the date purchased. This warranty does not apply to parts unless the installation instructions are followed in their entirety. If instructions are not available the work should be performed by a licensed mechanic.
This warranty does not cover any expenses incurred in the removal and / or reinstallation of the auto part. Specifically, this warranty does not cover any expenses for TIME, RENTAL, OR OTHER PARTS not purchased from us, or ANY LABOR. This warranty covers fixing or replacing the part only. This warranty is offered only to the original purchaser of the part. This warranty does not apply, and will be voided, if the auto part sold has been damaged by abuse, misuse, accident, neglect, or alteration, or if it has been repaired by anyone other than us. Your warranty will be null and void if the part fails due to improper installation. If the auto part sold should prove defective in material or workmanship within the warranty period, return the auto part to us, postage prepaid, along with your sales invoice. Your dated invoice will establish your eligibility for the warranty. We will, at our option, replace or repair the part free of charge and return it to you postage prepaid.
THE EXPRESS WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND OUR ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.
Exchange Policy
If you need to trade your item, you can exchange qualifying items through sales@spaturbousa.com.
If the item you wish to return doesn't have an exchange option or you received the item as a gift, you'll need to return the original item and place a new order.
Note:
If the item you're exchanging costs less that your original purchase we will refund you the difference.
This policy refers to color/size or if it doesn’t fit your car only.
Return Policy
Items can be returned and replaced within 30 days of ordered.
You need to inform us the tracking number so can advise our fulfillment center, once the item is received, it takes 2 business days for the refund to be processed and 3-5 business days for the refund amount to show up in your account.
Your return label will require you to return the item at your own expense.
If you're returning a defective, damaged or incorrect item, please contact us before you ship the Item.
