- Home Forged Piston and Connecting Rods Kit
- Forged piston and Connecting rod kit for VW 1.8 8V (83,75mm) 1000hp
Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder)
Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm
Compression height: 32.40mm.
Dish volume: 17.3cc
Pin offset: 1.10mm.
Material: Forged aluminum 4032 T6.
Average piston weight (unit, without pin): 326g (11.49 oz).
Rated for 1000hp.
Innovative high performance piston skirt design that provides:
1. Smaller piston to bore clearance
2. Less noise
3. Better ring seal
4. Higher power
Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions.
Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal.
Pin oil lubrication by broaches and oiler to reduce friction and increase durability.
Super A Piston Pin for VW827 (63.45mm) – 4pcs set
For VW 827 engines (Super A pistons)
Dimensions: 63.45mm x 20mm (length x O.D.)
Average unit weight: 116g (4.09 oz)
Rated for 1.000hp
Made from special steel alloys that combines optimal mass with high resistance.
VW 827 Piston Rings 83.75mm SPA DLC series
1º ring 1.5mm – Made from carbon steel, which is 35% stronger than cast iron and about 30% lighter. DLC treated, which is the application of carbon particles, that provides higher resistance and lower friction.
2° ring 1.5mm – Made from cast iron.
3º ring 2.0mm – Made by 3 parts, providing easy handling, better oil film stability and improvement in oil removal by the lubrication holes due to its optimized design.
VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp
For AGU TDI AEB 8V 16V engine, and others VW engines with OEM 144mm con rods.
Center to center distance: 144mm (5.669").
Big end size: 50.60mm (1.992").
Small end size: 20mm (0.787").
For up to: 1000hp.
SPA800 3/8" bolts
Tightening torque: 6 kgfm (43,4 lbft).
4340 forged steel.
595g (20.98 oz) each rod with bolts
Set with 4 pieces.
3 oil channel at the small end and 3 oil channel at the big end for maximum pin lubrication.
- Unknown Type
- Adapters for fuel injectors
- Adapters, lubrification & more
- Air filters
- Connecting Rods
- Cylinder head
- Electric components
- Electric fuel pump
- Engine mounts
- Engine Pulleys
- Forged Piston and Connecting Rods Kit
- Forged pistons
- Fuel Pressure Regulators / Fuel management units
- Ignition coil
- Intake manifolds
- Intake tubes / Acessories
- Oil Coolers
- Other Shop Equipment
- Perfomance Camshafts
- Performance head gaskets /Head stud sets
- Spark plug wire sets
- Turbine housings
- Turbo manifolds