Forged piston and rings set 83mm VW 2.5L Jetta MK5 07k + VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp) + King Engine Bearings Forged piston and rings set 83mm VW 2.5L Jetta MK5 07k + VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp) + King Engine Bearings SPA PERFORMANCE Forged piston and rings set 83mm VW 2.5L Jetta MK5 For VW 2.5L Jetta MK5 Nominal bore diameter: 83mm  Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder) Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm Compression height: 29.3mm. Dish volume: 12.7cc Pin offset: 1.10mm. Material: Forged aluminum 4032 T6. Average piston weight (unit, without pin): 329g (11.60 oz). Rated for 1000hp. Innovative high performance piston skirt design that provides: 1. Smaller piston to bore clearance  2. Less noise 3. Better ring seal 4. Higher power 5. Durability Features: Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions. Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal. Pin oil lubrication by broaches and oiler to reduce friction and increase durability. Super A Piston Pin VW 2.5L Jetta MK5  – 5pcs set Dimensions: 63.45mm x 20mm (length x O.D.) Average unit weight: 116g (4.09 oz) Rated for 1.000hp Made from special steel alloys that combines optimal mass with high resistance.   Piston rings 83mm set Contains 01 complete set for 5 cylinder engine. Compatible with SPA Super A, with 1.5mm / 1.5mm and 2mm channels. Ring thickness: 1st ring 1.5mm - Made of carbon steel, which is 35% more resistant than cast iron and on average 30% lighter. With DLC (Diamond-Like Carbon) treatment, which is the application of carbon particles, whose physical and chemical properties are very close to those of the diamond, providing greater resistance to the material and reducing the friction of the surface, which significantly reduces friction when working against other surfaces. 2nd ring 1.5mm - Made of cast iron. 3rd ring 2.0mm - Manufactured in 3 pieces, which guarantees easy maintenance, better stability in the control of the oil film and improves the oil removal through the piston lubrication holes, as it has a better area for displacing this oil.   VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp)   For AGU TDI AEB 8V 16V engine, and others VW engines with OEM 144mm con rods. Center to center distance: 144mm (5.669"). Big end size: 50.60mm (1.992"). Small end size: 20mm (0.787"). For up to: 1000hp. SPA800 3/8" bolts Tightening torque: 6 kgfm (43,4 lbft). 4340 forged steel. 595g (20.98 oz) each rod with bolts Set with 4 pieces. 3 oil channel at the small end and 3 oil channel at the big end for maximum pin lubrication.   All SPA Turbo connecting rods come with CMD Extreme Pressure lubricants.About CMD Extreme Pressure lubricants:When the operation requires extreme pressure, all ordinary lubricants break down and allow metal-to-metal contact with consequent scoring, frictional heat, work and cutting tool damage.They will not corrode the finest surfaces nor will they mulsify with cooling liquids. But these facts are not the most remarkable feature of CMD lubricants. The truly outstanding property of CMD is its ability to withstand extreme pressures!CMD EXTREME PRESSURE lubricants are regularly used from 40,000 to 50,000 psi.   King Engine Bearings CR4104XP026 - King XP-Series Rod Bearings King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods.King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications. Crankshaft: 47.757  (minimum) / 47.777 (maximum) Engine Crankshaft Undersize (in.): 0.001 in Big end size: 50.599 (minimum) / 50.620 (maximum) Max Wall: 1.402 Max Length: 18.971 Quantity: 4 units  

Forged piston and rings set 83mm VW 2.5L Jetta MK5 07k + VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp) + King Engine Bearings

Code: CMBUSAMVLPTW34003

Forged piston and rings set 83mm VW 2.5L Jetta MK5

For VW 2.5L Jetta MK5

Nominal bore diameter: 83mm

 Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder)

Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm

Compression height: 29.3mm.

Dish volume: 12.7cc

Pin offset: 1.10mm.

Material: Forged aluminum 4032 T6.

Average piston weight (unit, without pin): 329g (11.60 oz).

Rated for 1000hp.

Innovative high performance piston skirt design that provides:

1. Smaller piston to bore clearance 

2. Less noise

3. Better ring seal

4. Higher power

5. Durability


Features:

Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions.

Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal.

Pin oil lubrication by broaches and oiler to reduce friction and increase durability.


Super A Piston Pin VW 2.5L Jetta MK5  – 5pcs set

Dimensions: 63.45mm x 20mm (length x O.D.)

Average unit weight: 116g (4.09 oz)

Rated for 1.000hp

Made from special steel alloys that combines optimal mass with high resistance.

 

Piston rings 83mm set

Contains 01 complete set for 5 cylinder engine.
Compatible with SPA Super A, with 1.5mm / 1.5mm and 2mm channels.
Ring thickness:
1st ring 1.5mm - Made of carbon steel, which is 35% more resistant than cast iron and on average 30% lighter. With DLC (Diamond-Like Carbon) treatment, which is the application of carbon particles, whose physical and chemical properties are very close to those of the diamond, providing greater resistance to the material and reducing the friction of the surface, which significantly reduces friction when working against other surfaces.
2nd ring 1.5mm - Made of cast iron.
3rd ring 2.0mm - Manufactured in 3 pieces, which guarantees easy maintenance, better stability in the control of the oil film and improves the oil removal through the piston lubrication holes, as it has a better area for displacing this oil.

 

VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp)

 

  • For AGU TDI AEB 8V 16V engine, and others VW engines with OEM 144mm con rods.
  • Center to center distance: 144mm (5.669").
  • Big end size: 50.60mm (1.992").
  • Small end size: 20mm (0.787").
  • For up to: 1000hp.
  • SPA800 3/8" bolts
  • Tightening torque: 6 kgfm (43,4 lbft).
  • 4340 forged steel.
  • 595g (20.98 oz) each rod with bolts
  • Set with 4 pieces.
  • 3 oil channel at the small end and 3 oil channel at the big end for maximum pin lubrication.

 

All SPA Turbo connecting rods come with CMD Extreme Pressure lubricants.

About CMD Extreme Pressure lubricants:

When the operation requires extreme pressure, all ordinary lubricants break down and allow metal-to-metal contact with consequent scoring, frictional heat, work and cutting tool damage.
They will not corrode the finest surfaces nor will they mulsify with cooling liquids. But these facts are not the most remarkable feature of CMD lubricants. The truly outstanding property of CMD is its ability to withstand extreme pressures!
CMD EXTREME PRESSURE lubricants are regularly used from 40,000 to 50,000 psi.

 

King Engine Bearings CR4104XP026 - King XP-Series Rod Bearings

  • King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods.

    King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
  • Crankshaft: 47.757  (minimum) / 47.777 (maximum)
  • Engine Crankshaft Undersize (in.): 0.001 in
  • Big end size: 50.599 (minimum) / 50.620 (maximum)
  • Max Wall: 1.402
  • Max Length: 18.971
  • Quantity: 4 units

 

        Forged piston and rings set 83mm VW 2.5L Jetta MK5

        For VW 2.5L Jetta MK5

        Nominal bore diameter: 83mm

         Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder)

        Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm

        Compression height: 29.3mm.

        Dish volume: 12.7cc

        Pin offset: 1.10mm.

        Material: Forged aluminum 4032 T6.

        Average piston weight (unit, without pin): 329g (11.60 oz).

        Rated for 1000hp.

        Innovative high performance piston skirt design that provides:

        1. Smaller piston to bore clearance 

        2. Less noise

        3. Better ring seal

        4. Higher power

        5. Durability


        Features:

        Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions.

        Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal.

        Pin oil lubrication by broaches and oiler to reduce friction and increase durability.


        Super A Piston Pin VW 2.5L Jetta MK5  – 5pcs set

        Dimensions: 63.45mm x 20mm (length x O.D.)

        Average unit weight: 116g (4.09 oz)

        Rated for 1.000hp

        Made from special steel alloys that combines optimal mass with high resistance.

         

        Piston rings 83mm set

        Contains 01 complete set for 5 cylinder engine.
        Compatible with SPA Super A, with 1.5mm / 1.5mm and 2mm channels.
        Ring thickness:
        1st ring 1.5mm - Made of carbon steel, which is 35% more resistant than cast iron and on average 30% lighter. With DLC (Diamond-Like Carbon) treatment, which is the application of carbon particles, whose physical and chemical properties are very close to those of the diamond, providing greater resistance to the material and reducing the friction of the surface, which significantly reduces friction when working against other surfaces.
        2nd ring 1.5mm - Made of cast iron.
        3rd ring 2.0mm - Manufactured in 3 pieces, which guarantees easy maintenance, better stability in the control of the oil film and improves the oil removal through the piston lubrication holes, as it has a better area for displacing this oil.

         

        VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp)

         

        • For AGU TDI AEB 8V 16V engine, and others VW engines with OEM 144mm con rods.
        • Center to center distance: 144mm (5.669").
        • Big end size: 50.60mm (1.992").
        • Small end size: 20mm (0.787").
        • For up to: 1000hp.
        • SPA800 3/8" bolts
        • Tightening torque: 6 kgfm (43,4 lbft).
        • 4340 forged steel.
        • 595g (20.98 oz) each rod with bolts
        • Set with 4 pieces.
        • 3 oil channel at the small end and 3 oil channel at the big end for maximum pin lubrication.

         

        All SPA Turbo connecting rods come with CMD Extreme Pressure lubricants.

        About CMD Extreme Pressure lubricants:

        When the operation requires extreme pressure, all ordinary lubricants break down and allow metal-to-metal contact with consequent scoring, frictional heat, work and cutting tool damage.
        They will not corrode the finest surfaces nor will they mulsify with cooling liquids. But these facts are not the most remarkable feature of CMD lubricants. The truly outstanding property of CMD is its ability to withstand extreme pressures!
        CMD EXTREME PRESSURE lubricants are regularly used from 40,000 to 50,000 psi.

         

        King Engine Bearings CR4104XP026 - King XP-Series Rod Bearings

        • King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods.

          King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
        • Crankshaft: 47.757  (minimum) / 47.777 (maximum)
        • Engine Crankshaft Undersize (in.): 0.001 in
        • Big end size: 50.599 (minimum) / 50.620 (maximum)
        • Max Wall: 1.402
        • Max Length: 18.971
        • Quantity: 4 units

         

              Use and Retention

              We use the personal information we collect to: provide and improve our Services, provide you with a personalized experience on our sites (especially, by offering you services and items that you may like), contact you about your account and our Services, provide you customer service, provide you with personalized advertising and marketing, and detect, prevent, mitigate, and investigate fraudulent or illegal activities.

              We retain your personal information as long as it is necessary and relevant for our operations. In addition, we may retain personal information from closed accounts to comply with national laws, prevent fraud, collect any fees owed, resolve disputes, troubleshoot problems, assist with any investigation, enforce our User Agreement and take other actions permitted or required by applicable national laws.

               

              Warranty Policies

              SPA Turbo offers a one year, unlimited mileage warranty on all parts sold unless otherwise noted. We only offer the highest quality parts available, but in some rare cases there are manufacturer defects. If you have a defective item under warranty we offer options to make warranty service easier for you and we will send you a new replacement part. However, our warranty does not cover any labor that may be involved with your repair. In most cases you have the following options for warranty service:

              1) You may return the warranty item to us for a replacement.
              2) You may pay a deposit and have a replacement item sent in advance. Once you return the warranty item to us your deposit will be refunded. In either case we pay for shipping within the continental USA.
              Please be sure to include some contact number(s) and email(s). Our techs will contact you with troubleshooting tips or to arrange a replacement.

               

              Warranty Claim

              If you have a problem with one of our parts, we will need to process a warranty claim. If the part has not been installed, then please contact us and we can order up the correct parts.

              The following information must be mailed to sales@spaturbousa.com before any replacement can be shipped.

              1. A cover letter with your name, invoice number and problem. Ship to name if it was shipped somewhere else.
              2. pictures and description of the problem, and the engine that the part was installed to.

               

              Legal Warranty Version

              We warranty all automotive parts to be free from defects in material and workmanship for the period specified on your invoice. It begins from the date purchased. This warranty does not apply to parts unless the installation instructions are followed in their entirety. If instructions are not available the work should be performed by a licensed mechanic.

              This warranty does not cover any expenses incurred in the removal and / or reinstallation of the auto part. Specifically, this warranty does not cover any expenses for TIME, RENTAL, OR OTHER PARTS not purchased from us, or ANY LABOR. This warranty covers fixing or replacing the part only. This warranty is offered only to the original purchaser of the part. This warranty does not apply, and will be voided, if the auto part sold has been damaged by abuse, misuse, accident, neglect, or alteration, or if it has been repaired by anyone other than us. Your warranty will be null and void if the part fails due to improper installation. If the auto part sold should prove defective in material or workmanship within the warranty period, return the auto part to us, postage prepaid, along with your sales invoice. Your dated invoice will establish your eligibility for the warranty. We will, at our option, replace or repair the part free of charge and return it to you postage prepaid.

              THE EXPRESS WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND OUR ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.

               

              Exchange Policy

              If you need to trade your item, you can exchange qualifying items through sales@spaturbousa.com.

              If the item you wish to return doesn't have an exchange option or you received the item as a gift, you'll need to return the original item and place a new order.

              Note:

              If the item you're exchanging costs less that your original purchase we will refund you the difference.

              This policy refers to color/size or if it doesn’t fit your car only.

               

              Return Policy

              Items can be returned and replaced within 30 days of ordered.

              You need to inform us the tracking number so can advise our fulfillment center, once the item is received, it takes 2 business days for the refund to be processed and 3-5 business days for the refund amount to show up in your account.

              Your return label will require you to return the item at your own expense.

              If you're returning a defective, damaged or incorrect item, please contact us before you ship the Item.